Yescom Trampoline Mat with Rings for 12 Foot Round Frame

4 questions to ask before buying Yescom Trampoline Mat

Different trampoline requires different mat. In order to find a right size mat for your trampoline, please ask the below questions before ordering the mat:
1. What is the shape of your trampoline? Most trampolines are round in shape, but some are square or rectangle. All Yescom mats are round and they only fit for round trampoline.
2. Did you measure the diameter of your frame properly? When measuring, please note you need to measure the outer diameter of your trampoline frame vertically and horizontally. Never measure the diamerter of your old mat.
3. Did you count the number of the springs? The total amount of the springs in your trampoline needs to match with the amount of the V rings of the mat you are going to order.
4. Did you measure the length of the springs correctly? When you are measuring the spring, make sure the spring is not stretched, then measure from one hook-end to another hook-end.
We currently have trampoline mat for 12ft, 13ft, 14ft and 15ft trampoline. You can refer to the below link to choose the correct mat for your trampoline: A Quick Overview of Yescom Trampoline Mat

A Quick Overview of Yescom Trampoline Mat

What is Trampoline mat?
Trampoline mat, also called trampoline jumping bed or jumping surface, is the one of the critical parts of trampoline. As it is the most used part, as you know, you will jump on this piece directly, regular inspection is recommended. If you find the trampoline mat is worn out, please replace it immediately, otherwise a bad trampoline may causes danger to jumper who keep using it.
https://5035664.app.netsuite.com/core/media/media.nl?id=55026353&c=5035664&h=XryRWNPIhVg-hqQ8_PJOqG5ZG2VMv7MdA31L6wfGLapc98GT
What size of Trampoline Mat do Yescom have?
We offer different sizes of trampoline mat and they are made of heavy-duty polypropylene with carbon coated, which is more durable and can ensure the safety of the jumper.

Product ID	Shape of mat	Number of V-rings in the mat	Package Content	Compatible Trampoline
				Frame Shape	Frame Size	Number of Spings	Length of Spings
YES2082	Round	60	Mat only, springs and trampoline frame are not included.	Round	12ft	60	5.5"
YES2085	Round	72		Round	13ft	72	5.5"
YES2076	Round	72		Round	14ft	72	7"
YES2078	Round	88		Round	14ft	88	7"
YES2079	Round	96		Round	14ft	96	8.5"
YES2081	Round	96		Round	15ft	96	7"

How to fold a trampoline mat for storage?

It is easy to fold the mat. After you have took it from the trampoline, please straighten it on the ground, then fold the trampoline half first. Again fold it in half and repeat the actions until it is small enough to fit your storage box. A kind note, before folding the mat, you should check if there is any wear or tear in the mat. If you find any issue, you must repair the mat hole and then store it.

How to install trampoline mat and springs?

The installation is not difficult if you follow the instructions step by step. We highly recommend you find a partner (adult) to help you and that you use tools like T-hook and protective gloves so you can install the springs easily. Follow the directions below:
Step 1: Place the mat in the center of the trampoline frame.
Step 2: Insert spring#1, one end should be inserted into one of the V rings on the mat, the other end should be inserted into the hole in the frame.
Step 3: On the opposite side of the trampoline frame, insert spring#2, you may need to use the T hook now, as the tension increased.
Step 4: Go to the midway point between the two attached springs, on either side of the trampoline, insert spring#3 and spring#4;
Step 5: Go to the midway point between spring#1 and spring#3, insert spring #5; Go to the midway point between spring# 2 and spring#4, insert #6; Go the midway point between spring#2 and spring#3, insert spring#7; Go to the midway point between spring#1 and spring#4, insert spring#8;
Step 6: Keep inserting springs at every middle v-ring between the adjacent springs on one side and then the opposite ones on the opposite side, until all the spring are inserted. The basic rule is that you need to spread the tension throughout the mat and springs evenly. Do not insert all the springs on one side with only 1-2 springs on the other sides.
https://5035664.app.netsuite.com/core/media/media.nl?id=55060901&c=5035664&h=1eAy-hp3_A_Gqi79pdUI8e5xp7bqu7CbqTfSW_b48hxluSyC