Yescom 9ft 8-Rib Patio Tilt Market Umbrella w/ 200gsm Canopy

We have great difficulty with winding the umbrella up and down.

If the umbrella gets stuck when rotating the crank, slowly turn it clockwise and counterclockwise to adjust the crank smoothly. In addition, you can check whether the pull rope near the top of the umbrella pole is knotted, whether the pulley rotates normally, and whether the pull rope is placed in the middle of the pulley.

The tilt button stays locked, won't stay up.

1. Loosen the screw.
2. Snap the spring into the correct position.
3. Press and hold the button, turn the upper and lower joints to engage.
4. Keep pressing the button and tighten the screw.

Patio Umbrella: Tips to extend the life of your patio umbrella

Here are a few maintenance tips to keep your umbrella looking and working like new.
1. Fabric Care:
For lighter colored umbrellas, one of the best ways to keep your umbrella fabric in like-new condition is to remove the stains on a monthly basis. If the fabric gets dirty, wipe it off with a towel or a soft bristle brush. It is not recommended to soak the fabric.
For darker colored umbrellas, it is better to use an additional protective spray so it will not fade quickly.
2. Frame/pole Care:
Open or close it gently, do not too be too forceful. For the metal umbrellas that use the hand crank, if it gets stuck, slowly turn the crank clockwise and counterclockwise to ensure it turns smoothly. We also recommend periodically checking whether the pull rope near the top of the umbrella pole is knotted, whether the pulley rotates normally, and whether the pull rope is in the middle of the pulley.
A wooden or metal pole is not designed to be used inside a pool, but can be used near a pool.
If there is an accumulation of mold between the wooden umbrella frame, you can follow the below steps to remove it: (1). Add a teaspoon of soap to a spray bottle filled with water and shake it up. (2). Spray the affected area and use a soft-bristled brush to gently scrub away the mold, sponging up any excess liquid as you clean. (3). Dry the surface completely with a towel and add some some furniture wax in case it gets mold again.
3. General tip:
Close it and use a umbrella cover to protect it when not in use. If you want to store it for next summer, store it in a dry, shaded location. Always make sure it is completely dry before storing it.

Stand recommendation for Yescom Patio Umbrella

Choosing the right base or stand is critical to ensure that your patio umbrella is stable and upright under a gentle breeze weather condition. Center pole umbrellas can use either mobile or fixed bases, but most people like a mobile base because it can be easily moved from one spot to another. Most mobile bases are round, there are also hollow plastic ones that require you to add sand or water to create the weightiness. When selecting an appropriate umbrella stand, you will need to know the exact diameter of your umbrella's center pole.
Base Weight Suitable Yescom Patio Umbrella Suitable other brand's umbrella Assembly required Dimension Image 20lb Half Round Base Stand 20 Lbs Yescom 10ft half umbrella Fits Half Patio Umbrellas if the pole diameter is smaller than the tube diameter. Yes Round Base Stand 20Lb 20 Lbs All Yescom 9Ft -10Ft Patio Umbrella Fits 8Ft -10Ft Patio Umbrellas with pole diameter less than 2 1/8" Yes Metal Cross Base with Sector Stand Net weight of cross base is 9.5 Lbs and fan shaped stand is 26.5lb per piece 15x9 ft Patio Rectangular Market Umbrella; Yescom 13ft Metal Pole Patio Umbrella Fits different style & size patio umbrellas with pole within 2" in diameter YES 25 L 16x16" Umbrella Weighted Base Net weight is 3 lbs, can fill 25 L water or sand All Yescom 6ft-8ft Beach Umbrella / NO 62lbs Base Stand Net weight is 4.6 Lbs; Weighs 48 Lbs after filling water or 62 Lbs while filling sand Fits Yescom 8-10ft Round Patio Umbrella Fits most of 8/9/10ft umbrella with pole diameter from 1 1/2" to 1 7/8" YES

Do you have any tips to help me find a compatible umbrella stand/base?

Online, you will many times see the phrases "umbrella base" and "umbrella stand" used interchangeably so what is the actual difference? Usually, an umbrella "base" is for use under a table, while a "stand" is usually heavier and free standing. However, both kinds of holders are used in various outdoor locations.
1. Weight when filled:
When you see a base shown as "30-pound" or "50-pound," that usually indicates how heavy the base will be when it's filled with water or sand. A heavier weight is better for steadying a larger umbrella in windy conditions.
2. Size:
The majority of umbrella bases are 20 inches in diameter. This ensures that they fit under tables without posing a tripping hazard. It's not the diameter of a base that steadies a larger umbrella; it's the weight of the base when it's filled that matters most.
3. Pole size:
Smaller umbrellas have thinner pole diameters, typically from 1 3/8 inches to 1 1/2 inches. The average size of an umbrella pole is usually 1.5 inches in diameter. Larger umbrellas, such as 11- and 13-foot canopies, have larger pole diameters, from 1 1/2 inches to 2.5 inches in diameter. Before purchasing, it makes sense to know the diameter of your umbrella pole and the circumference of the umbrella canopy. Occasionally, a large umbrella canopy comes with a smaller-than-expected pole diameter.
4. Fill options:
Decide if you want to fill a base with water or sand or if you prefer to have a solid base that is not fillable. Water may make a taller base slightly unstable or wobbly, especially when moving it around. This happens because water is not as dense and stable as sand filling.
5. Durability:
The material a base is made from usually indicates how durable it will be over time. Cast iron bases are heavy but can rust in high humidity. Powder-coated steel bases weighted with concrete may rust over time, leaving marks on your deck or patio. Concrete bases won't rust or crack, but you can't always add filler. Heavy-duty molded resin and plastic bases won't rust, flake, or crack.