Shop led neon rope light from Yescom USA for sign makers, event pros, lighting contractors, and designers working on storefronts, commercial facades, patios, and architectural installs.
From color-changing RGBW and warm white neon in lengths up to 300 feet to controllers, splice connectors, channels, and replacement strips, the range covers a full neon installation.
Discover the full LED neon rope lights range today.
FAQ
What is the difference between RGBW and warm white neon rope light?
Color output sets them apart. The RGBW neon rope light runs 108 LEDs per meter and offers 16 colors with RF control, plus app control through the 1-way controller, while the warm white neon rope light runs 120 LEDs per meter and emits a warm white glow with RF control. Both run on 120V.
Which neon rope light works for a long commercial run?
Both neon lines reach up to 300 feet. A single 120V outlet runs up to 150 feet, and the 300ft kit pairs two 150ft reels through a 2-way splitter for a continuous run with no voltage drop or extra drivers. The 2-way controller provides the same split for a custom run.
Can I control neon rope light color and brightness with an app?
Yes. The RGBW neon rope light pairs with a smartphone app through the 1-way controller, and with its RF remote, for 16 colors, stepless brightness from 1 to 100 percent, and 4 dynamic modes including strobe, flash, and fade. App control also adds a music mode that pulses the colors to sound.
Is there a hardwire neon rope light for permanent installs?
Yes. The RGBW hardwire neon rope light runs 100ft and comes without a controller or plug-in, which are sold separately. It carries 108 LEDs per meter, IP65 water resistance, and app or RF control.
What controller do I need for my neon rope light?
Match the controller to the neon color type. The RGBW controller drives multicolor neon, while the warm white controller drives 2700K neon, and each comes as a 1-way controller or a 2-way splitter. Both include a UL-listed plug with overcurrent protection.
Can I cut and connect neon rope light to fit corners?
Yes. Cut the neon along its marked intervals, then join sections with a splice kit matched to the tube and seal each joint with glue. The 4-wire splice kit fits the RGBW 8x18mm tube, and the 2-wire splice kit fits the warm white 7x14mm tube, each in I, T, L, and wire shapes for straight runs, splits, and 90-degree corners.
How do I mount neon rope light on a wall or surface?
Secure the neon in a channel mounted to the wall or surface. The stainless steel flexible clip channel bends around curves for the RGBW tube, the aluminium channel track suits straight runs, and the plastic U-channel suits indoor and covered outdoor displays.
Are neon rope lights waterproof for outdoor use?
Yes. The neon rope lights carry an IP65 rating for outdoor use with a UL-listed plug. The IP65 rating covers the light strip itself, and the UL-listed plug and cord guard against overheating during all-day operation.
Can I replace a section of neon rope light?
Yes. The 10ft RGBW replacement strip extends or repairs a multicolor run, and the 10ft 2700K replacement strip does the same for a warm white run. Each cuts to length with scissors and connects to an existing setup with the included connectors and pins.
How long do LED neon rope lights last?
The RGBW and warm white neon rope lights are rated for 20,000 hours of use. Mounting them in an aluminium channel helps dissipate heat to protect the run over long commercial hours.
Can I adjust the brightness and speed on warm white neon rope light?
Yes. The warm white neon rope light includes an RF remote that adjusts brightness from 10 to 100 percent and runs a flashing mode with adjustable speed. The remote works up to 33 feet.
What is the difference between neon and LED rope light?
Neon rope light gives a solid, continuous glow with no visible dots, while crystal LED rope light shows individual bulbs inside a round tube. Neon suits signage, logo outlines, and smooth architectural lines. For the bulb-in-tube style instead, see the LED rope lights collection.
Which channel should I use to mount neon rope light outdoors?
For permanent outdoor runs, the aluminium channel track for 2700K neon and the aluminium channel track for RGBW neon resist rust, corrosion, and weather for year-round outdoor use. The plastic U-channel is better kept to indoor or covered areas, since the plastic can degrade under long sun and rain exposure.
Can I buy neon rope lights in bulk?
Yes. Sign makers, lighting contractors, and event pros can submit a wholesale inquiry through the Wholesale Inquiry Form. Approved business buyers get special pricing, priority support, and an exclusive B2B order portal through the B2B Program. Subscribers also unlock discounts through the YES Rewards program.
Can I return neon rope light if I ordered the wrong size?
Yes, within 30 days if the item is unused and in original condition with all tags, packaging, and proof of purchase. Request an RMA through the Return Policy page first, and the customer covers return shipping for preference returns.
How quickly do neon rope lights ship?
Orders paid by 12PM PST are typically processed the same business day, with delivery generally taking 2 to 4 business days after that. Shipping is free via UPS to the lower 48 states, with no P.O. Box, APO, or FPO addresses accepted. Larger reels may ship in multiple packages that arrive separately. For full details, visit the Shipping Policy page.