1/9
2/9
3/9
4/9
5/9
6/9
7/9
8/9
9/9
Orders before 12pm PST will be shipped within 24hrs(Excluding Preorders). Learn more >
Return accepted within 30 days with original packaging. Learn more >
Yescom 10 ft. Upgraded Patio Furniture Umbrella with 8 Ribs LED lights, helps you to be effectively protected from sunlight and drizzle. It has a tilt system to flexibly adjust the shielding position. It will save energy by using the solar system.
High Quality:
Product Details:
Also In The Box:
Shipping Disclaimer: Due to the size and weight of this product, it may be shipped in multiple packages. Packages may be delivered separately by the carrier.
Here are a few maintenance tips to keep your umbrella looking and working like new.
1. Fabric Care:
For lighter colored umbrellas, one of the best ways to keep your umbrella fabric in like-new condition is to remove the stains on a monthly basis. If the fabric gets dirty, wipe it off with a towel or a soft bristle brush. It is not recommended to soak the fabric.
For darker colored umbrellas, it is better to use an additional protective spray so it will not fade quickly.
2. Frame/pole Care:
Open or close it gently, do not too be too forceful. For the metal umbrellas that use the hand crank, if it gets stuck, slowly turn the crank clockwise and counterclockwise to ensure it turns smoothly. We also recommend periodically checking whether the pull rope near the top of the umbrella pole is knotted, whether the pulley rotates normally, and whether the pull rope is in the middle of the pulley.
A wooden or metal pole is not designed to be used inside a pool, but can be used near a pool.
If there is an accumulation of mold between the wooden umbrella frame, you can follow the below steps to remove it: (1). Add a teaspoon of soap to a spray bottle filled with water and shake it up. (2). Spray the affected area and use a soft-bristled brush to gently scrub away the mold, sponging up any excess liquid as you clean. (3). Dry the surface completely with a towel and add some some furniture wax in case it gets mold again.
3. General tip:
Close it and use a umbrella cover to protect it when not in use. If you want to store it for next summer, store it in a dry, shaded location. Always make sure it is completely dry before storing it.
After installing the solar panel, please check whether the solar panel interface is loose, tear off the film on the surface of the solar panel, turn off the switch, and place the umbrella in a sunny place where it will be exposed to the sun for 6-8 hours. When it is dark, turn on the switch again to see if it can light up normally.
1. Install the solar panel onto the top of the umbrella.
2. Rotate the solar panel clockwise to tighten it.
3. Rotate the solar panel in the opposite direction to loosen it.
4. Remove the solar panel from the top of the umbrella.
Subscribe to unlock exclusive VIP B2B Tiered Pricing, early access to new commercial arrivals, and seasonal industry trend reports