1/10
2/10
3/10
4/10
5/10
6/10
7/10
8/10
9/10
10/10
Orders before 12pm PST will be shipped within 24hrs(Excluding Preorders). Learn more >
Return accepted within 30 days with original packaging. Learn more >
10 foot dance pole with base is a spinning and static in one with the latest size - 1.77"(45 mm). It is thinner than the older style 2" pole, but wider than the brass permanent poles that you often see in clubs. This pole is fully removable, height adjustable and portable. It only takes minutes to put up and take down. You can take it to your pole dancing classes, to your friend's, or just practice or spice up your parties at home! Do not miss such a hot exercise - Pole Dancing. Come and build an amazing body with the benefits of general and exotic fitness.
High Quality:
Also In The Box:
Product Details:
Warnings: This pole should be fixed on a solid but not imitated and suspended ceiling! Thank you.
Tips: Measure the distance between your ground and ceiling and refer to the diagram below to decide if you need to install either the extension pole A, extension pole B or extension pole C or all of them, or none of them. In the following steps, we will take scenario of installing extension pole A & B as an example. Note: Each scenario has overlap, please always increase the number of extension pole used if possible.
Shipping Disclaimer: Due to the size and weight of this product, it may be shipped in multiple packages. Packages may be delivered separately by the carrier.
To make sure your dance pole is installed correctly and used safely, please confirm the following points:
1. The poles are screwed together correctly (make sure the threads between the pipe fittings are properly engaged).
2. The black adjustment lever is correctly locked.
3. All the poles are completely vertical to the ceiling and bottom.
4. Please check whether there is any abnormal noise when the product rotates.
The AW Spinning Static Removable Dance Pole can only be used on a vaulted ceiling if a vaulted ceiling mount is purchased.
We do not sell the vaulted ceiling mount separately. Vaulted Ceiling Mount requires to be compatible with a 45mm diameter pole. https://www.google.com/search?q=vaulted+ceiling+adapter+for+dance+pole&source=lnms&tbm=shop&sa=X&ved=2ahUKEwiR_Jv4oqfwAhXUoFsKHShrD5YQ_AUoAXoECAEQAw&biw=1800&bih=881
Handy Tip: For uninstalltion, please used attached tools (Iron Rods) for assistance. Do not use hands only cause force is not strong enough to separate connections.
1. Please give a gentle knock on the connection with a hammer (or other heavy tools) helps to loosen it up first. It might be easier to have someone to unscrew poles when you tap it.
2. Please drop rust remover (WD-40) on joints where poles are stuck, give them a few minutes to work then try to unscrew poles.
3. Please put lubrication oil (or edible oil) on joints where poles are stuck, give them a few minutes to work then try to unscrew poles.
1. Please align threads and keep poles straight first, then gently screw poles until tightening.
2. If poles can not be screwed further, please stop screwing and do not try to get over by screwing them harder.
3. Check if there is rust or defectiveness on threads. If not, please put a little lubrication oil on it then try step 1 again. If so, please contact customer service for further assistance.
1. Please make sure that 1 of 2 screw holes on the connecting pole aligns the "Y" logo on the bottom base while tightening the 2 screws. Only in this way can the dancing pole remains static mode. Completely loosening 2 screws on connecting pole switches dancing pole into spinning mode.
2. Static mode: If 2 screws have been tightened and 1 of 2 screw holes has aligned the "Y" logo on the bottom base but the dancing pole would still keep spinning, please check which sections remains static and which sections do not, tighten those sections that remain spinning with other sections and bases. Please also remember to tighten the iron ring on the adjuster pole.
3. Spinning mode: If 2 screws on the connecting pole have been completely loosened but the dancing pole would still remain static, please check whether any blockage in bases and sections affects dancing pole being spun.
4. If you have tried everything but it still does not work, please contact our customer support and provide us with pictures or videos of the entire dancing pole and its installation for further assistance.
The smooth surface is the characteristic of the our dancing pole, if it is rough, it is easy to scratch the skin. Here are some things you might find useful for your slippery pole:
1. Heat the dancing pole up
The dance pole is very slippery in cold weather. At this time, you can wipe it with a hot towel, or turn on the heating in the room to heat the dance pole. Some people even use a hair dryer to heat the dance pole. This is also a good way. You just need to ensure that the dance pole is heated from top to bottom.
2. Try out some magnesium carbonate powder
Magnesium carbonate powder is specially used for sports. You can use it to increase friction.
The pin to make the pole stationery is M8x10mm socket head cap screws. It comes with the option of selecting spinning or static modes, simply by adjusting the screw nuts on the bottom base, ideal for both amateur or expert-level dance moves; It is the perfect dancing pole to accompany you in your journey from beginner to professional without needing a change or upgrade.
Subscribe to unlock exclusive VIP B2B Tiered Pricing, early access to new commercial arrivals, and seasonal industry trend reports