Upgrade and protect your Starlink setup with Starlink accessories built for reliability and portability.
Find pole mounts, pivot mounts, vehicle mounts, Ethernet adapters, replacement cables, and travel cases for Starlink Standard Gen 3, Starlink Mini, and Gen 2 models.
Shop Yescom USA for Starlink mounting accessories designed for home, RV, and mobile use.
FAQ
What types of Starlink accessories are available?
Accessories include pole mount kits, pivot roof mounts, pipe adapters, vehicle mounts, magnetic mounts, ladder mounts, Ethernet adapters, replacement cables, power cables, a router wall mount, travel bags, a hard case, and cable clamps for Starlink Standard Gen 3, Starlink Mini, and Gen 2 models.
What Starlink pole mount heights are available?
Starlink telescopic pole mounts are available in 14ft, 25ft, and 30ft options. Each pole uses flip-lock clamps for tool-free height adjustment and collapses down for easy transport and storage.
What is the difference between the Starlink Gen 3 pole mount and the Mini pole mount?
The Starlink Gen 3 Pole Mount Kit includes a telescopic aluminum pole, Gen 3 pipe adapter, PVC ground sleeve, cable clips, and a carry bag.
The Starlink Mini Pole Mount Kit with Tire Mount adds a tire mount base and two carry bags for RV and mobile setups. Each kit uses a different pipe adapter matched to its compatible dish.
Does the Starlink pole mount kit come with a tire mount?
Only the Starlink Mini Pole Mount Kit with Tire Mount includes a tire mount base, which sits under a vehicle wheel for stable, drill-free support. The Starlink Gen 3 Pole Mount Kit uses a PVC ground sleeve instead.
How do I mount Starlink on a pole?
Follow these steps to set up a Starlink pole mount kit:
-
Extend the telescopic pole to your desired height and lock each section with the flip-lock clamps.
-
Insert the pole into the PVC ground sleeve or tire mount base.
-
Remove the dish kickstand and attach the included pipe adapter using the provided screws.
-
Slide the dish and adapter onto the top of the pole and tighten for a secure fit.
-
Route the dish cable along the pole using the included cable screw clips.
Can I adjust the angle of my Starlink dish?
Yes. The Starlink Gen 3 Pivot Mount and the Starlink Mini Pivot Mount both offer a 180-degree swivel pivot and 360-degree rotating mast. A large knob allows tool-free angle adjustment. Both are made from die-cast aluminum alloy and reinforced polycarbonate for weather resistance.
How do I mount Starlink Mini on my vehicle?
There are three options.
-
Starlink Mini Vehicle Mount (Roof Rack) fits roof racks 1 1/8 to 1 3/4 inches thick with a drill-free screw setup.
-
Starlink Mini Magnetic Mount uses four magnetic feet with up to 220 lbs of pull force on metal roofs.
-
Starlink Mini Ladder Mount clamps onto RV ladders, railings, and crossbars from 0.8 to 1.17 inches. All three are built from aluminum alloy.
What Starlink cables are available?
The Starlink Gen 3 Cable is a CAT5e FTP replacement cable supporting up to 1000Mbps, available in 32ft, 49ft, 75ft, 98ft, and 150ft lengths. The Starlink Mini USB-C to DC Power Cable comes in 6.5ft, 9.8ft, and 16.4ft lengths. Both are built with anti-aging PVC and copper wire for outdoor durability.
Can I use a wired Ethernet connection with Starlink?
Yes. The Starlink Gen 3 Ethernet Adapter includes two SPX to RJ45 cables supporting up to 1000Mbps for the Gen 3 setup. The Starlink Gen 2 Ethernet Adapter provides the same wired connection for Gen 2. Both use plug-and-play design with weather-resistant construction.
Can I mount my Starlink router on a wall?
Yes. The Starlink Gen 3 Router Mount is a 2-in-1 wall bracket that holds both the Gen 3 router and power supply. Made from impact-resistant ABS, it installs with screws and keeps cables organized for a cleaner setup in any home, office, or RV environment.
Do I need a Starlink pipe adapter if I already have a pole?
Yes. A standalone pipe adapter attaches your Starlink dish to an existing flagpole, fence post, or vertical pole without a full kit. The Starlink Gen 3 Pipe Adapter fits poles from 1 1/4 to 2 1/2 inches, depending on the option selected. The Starlink Mini Pipe Adapter fits poles up to 1 1/2 inches. Both are made from glass-fiber reinforced polycarbonate with a fixed tilt angle for signal alignment.
How do I travel with my Starlink dish?
The Starlink Gen 3 Travel Bag holds the Gen 3 dish, router, power supply, and cables with buckle pockets for organization. The Starlink Mini Travel Bag fits the Mini dish and accessories across three interior pockets. Both are padded, made from wear-resistant polyester, and include a shoulder strap for handbag, shoulder, or crossbody carry.
Is there a protective hard case for Starlink Mini?
Yes. The Starlink Mini Hard Case has an injection-molded shell that is water-resistant, dust-proof, and impact-resistant. Precision-cut foam compartments hold the dish, kickstand, power supply, and cables securely. It weighs 4.3 lbs with a rubberized handle for easy carrying.
Are these Starlink accessories compatible with Gen 2?
Most accessories are designed for Starlink Standard Gen 3 or Starlink Mini. The only Gen 2 compatible product is the Starlink Gen 2 Ethernet Adapter, which provides a wired connection for the Standard Gen 2 setup. Gen 2 and Gen 3 adapters use different port types and are not interchangeable.
How do I secure the Starlink cable along my wall or roof?
The Starlink Cable Clamps come in a 20-piece pack, fitting cables between 5/32 and 1/4 inches in diameter. Made from steel and plastic with pre-installed screws, they attach to walls, roofs, or desks for a clean, trip-free cable run.
Can I return Starlink accessories if they don't fit my setup?
Yes. All accessories are covered by a 30-day return policy. Items must be unused, in original condition, with packaging and tags intact. Customers are responsible for return shipping unless the item arrived damaged, defective, or incorrect. For full details, visit the return and shipping policy page.